Hydraulic valves for dosing pumps
Priority valves PR for pump dispensers HKU(S)5
M+S Hydraulic
Product code: 996
maximum working pressure: 350 bar
maximum flow rate: 160 l/min
Valve blocks series 890645 for dosing pumps SUB
Lifam
Product code: 6720
maximum working pressure: 160 bar
maximum flow rate: 80 l/min
Valve blocks BKH for dosing pumps HKU and XY
M+S Hydraulic
Product code: 995
maximum working pressure: 240 bar
maximum flow rate: 80 l/min
Hydraulic valves
Principle work of hydraulic valves
Hydraulic valves are hydraulic devices which control the parameters of the fluid flow by changing the flow area of the hydraulic device through the movement of the shut-off-control element under the influence of the fluid flow (directly or indirectly)
Hydraulic valves types:
- check;
- relief;
- reduction;
- brake valves;
- discharge valves;
- chokes;
- hydraulic locks.
This type of valves are either control valves (regulate the pressure in the fluid flow) or directional valves (stop or let the fluid flow when the flow parameters specified by the valve settings are reached).
Hydraulic valves application
Hydraulic valves are used in case of necessary of the adjustment of the fluid passing through the pipeline. Control valves, for example, are used to adjust fluid pressure. Directional valves allow or block the flow, when it reaches specific parameters of pressure, temperature, speed.
The entire range of hydraulic valves and other hydraulic equipment is presented on our website. You can also choose the necessary hydraulic valves by type of installation: cartridge, modular, tiled (butt), pipe and flange mounting.