Hydraulic pumps single-threaded
Axial piston pumps FOX SE
Hydrocar
Product code: 5194
maximum working pressure: 450 bar
maximum displacеment: 108 cm3/rev
Axial piston pumps PE SE
Hydrocar
Product code: 5193
maximum working pressure: 330 bar
maximum displacеment: 32 cm3/rev
Axial piston pumps PE SE
Hydrocar
Product code: 5192
maximum working pressure: 330 bar
maximum displacеment: 60 cm3/rev
Axial piston pumps PE SE
Hydrocar
Product code: 5191
maximum working pressure: 330 bar
maximum displacеment: 100 cm3/rev
Axial piston pumps PE UNI
Hydrocar
Product code: 5190
maximum working pressure: 330 bar
maximum displacеment: 32 cm3/rev
Axial piston pumps PE UNI
Hydrocar
Product code: 5189
maximum working pressure: 330 bar
maximum displacеment: 60 cm3/rev
Axial piston pumps FOX
Hydrocar
Product code: 5195
maximum working pressure: 450 bar
maximum displacеment: 25 cm3/rev
Hydraulic pumps
Hydraulic pump is one of the main components of the power pack. Its movement and effort depends on what kind of working volume the pump has and what pressure it is able to create.
Before buying hydraulic pump you have to familiarize yourself with its main operating parameters:
- working volume is the volume of working fluid which the pump displaces in one cycle of operation. It should be understood that the real efficiency of any pump is slightly lower due to possible leaks of the working fluid.
- maximum pressure — maximum pressure value at which the pump retains its operational characteristics even during continuous operation.
Properly selected hydraulic pump for your purposes is the key to long and uninterrupted operation of the entire hydraulic system. We are ready to consult you in choosing a hydraulic pump that will be optimally suited for your goals and objectives. Hydraulic pumps made in Italy, Switzerland and other European countries are available. All products are certified, we give a guarantee for each unit.
Classification of hydraulic pumps
You can use hydraulic pump in any hydraulic power unit, this is the reason why you can buy pump one of the following types:
- axial piston systems are used in systems where it is necessary to use a pressure above 250 Bar with a working volume of liquid of more than 150 l/min;
- screw are designed for the largest feed, while they allow you to pump the working fluid with a very high viscosity;
- vane-type hydraulic pumps are very quiet;
- radial piston hydraulic pumps can operate at very high pressure indicators, but have one drawback: they have a rather modest displacement;
- manual hydraulic pumps are designed for manual pumping of small volumes of working fluid;
- gear hydraulic pumps are the most common type of pumps. Able to operate at pressures up to 250 bar, pumping up to 150 liters of working fluid per minute.
Motorimpex company offers to buy hydraulic pump of any type of the listed at reasonable price.