Hydraulic pumps
Gear hydraulic pumps SP1, SP2 and GP3
Galtech
Product code: 5124
maximum working pressure: 280 bar
maximum displacement: 77.2 cm3/rev
Multiple gear hydraulic pumps SP1, SP2 and GP3
Galtech
Product code: 5125
maximum working pressure: 280 bar
maximum displacement of the section: 77.2 cm3/rev
Two-stage hand pumps PAM
Galtech
Product code: 5126
for single-acting hydraulic cylinders
maximum working pressure: 380 bar
maximum displacement: 45 cm3/rev
Axial piston variable pump PV
Ponar
Product code: 757
for open loop circuit
maximum working pressure: 420 bar
maximum displacement: 270 cm3/rev
Vane variable pumps PV2V3 /12
Ponar
Product code: 759
maximum working pressure: 100 bar
maximum displacement: 8.5 cm3/rev
Vane variable pumps PV2V3/25
Ponar
Product code: 760
maximum working pressure: 100 bar
maximum displacement: 19 cm3/rev
Vane variable pumps PV2V3/40
Ponar
Product code: 761
maximum working pressure: 100 bar
maximum displacement: 32 cm3/rev
Vane pumps PV2V3/63
Ponar
Product code: 762
maximum working pressure: 100 bar
maximum displacement: 46 cm3/rev
Vane variable pumps double-flow PV2V3+PV2V3
Ponar
Product code: 758
maximum working pressure: 100 bar
maximum displacement of the section: 63 cm3/rev
Two-stage hand pumps UPTR
Ponar
Product code: 764
maximum working pressure: 40/700 bar
maximum displacement: 12/1.6 cm3/stroke
Two-stage hand pumps GL
Ponar
Product code: 803
maximum working pressure: 460 bar
maximum displacement: 111 cm3/stroke
Hand/foot pumps UPTN5
Ponar
Product code: 763
maximum working pressure: 120 bar
maximum displacement: 5 cm3/stroke
Hydraulic pumps
Hydraulic pump is one of the main components of the power pack. Its movement and effort depends on what kind of working volume the pump has and what pressure it is able to create.
Before buying hydraulic pump you have to familiarize yourself with its main operating parameters:
- working volume is the volume of working fluid which the pump displaces in one cycle of operation. It should be understood that the real efficiency of any pump is slightly lower due to possible leaks of the working fluid.
- maximum pressure — maximum pressure value at which the pump retains its operational characteristics even during continuous operation.
Properly selected hydraulic pump for your purposes is the key to long and uninterrupted operation of the entire hydraulic system. We are ready to consult you in choosing a hydraulic pump that will be optimally suited for your goals and objectives. Hydraulic pumps made in Italy, Switzerland and other European countries are available. All products are certified, we give a guarantee for each unit.
Classification of hydraulic pumps
You can use hydraulic pump in any hydraulic power unit, this is the reason why you can buy pump one of the following types:
- axial piston systems are used in systems where it is necessary to use a pressure above 250 Bar with a working volume of liquid of more than 150 l/min;
- screw are designed for the largest feed, while they allow you to pump the working fluid with a very high viscosity;
- vane-type hydraulic pumps are very quiet;
- radial piston hydraulic pumps can operate at very high pressure indicators, but have one drawback: they have a rather modest displacement;
- manual hydraulic pumps are designed for manual pumping of small volumes of working fluid;
- gear hydraulic pumps are the most common type of pumps. Able to operate at pressures up to 250 bar, pumping up to 150 liters of working fluid per minute.
Motorimpex company offers to buy hydraulic pump of any type of the listed at reasonable price.