Hydraulic motors
Gear hydraulic motors 1SM, 2SM and 3GM
Galtech
Product code: 5130
maximum torque: 190 N∙m
maximum speed: 4000 rpm
maximum displacement: 77.2 cm3/rev
maximum working pressure: 280 bar
Axial piston motors MBI M IA
Aber
Product code: 6418
maximum speed: 2300 rpm
maximum displacement: 80 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MBI P IA
Aber
Product code: 6419
maximum speed: 3000 rpm
maximum displacement: 110 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MBI M
Aber
Product code: 5055
maximum torque: 315 N∙m
maximum speed: 3200 rpm
maximum displacement: 50 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MBI P7
Aber
Product code: 5053
maximum torque: 685 N∙m
maximum speed: 2400 rpm
maximum displacement: 136 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MBI M7
Aber
Product code: 5054
maximum torque: 450 N∙m
maximum speed: 2400 rpm
maximum displacement: 81 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MBIF
Aber
Product code: 6212
maximum torque: 450 N∙m
maximum speed: 5400 rpm
maximum displacement: 82 cm3/rev
maximum working pressure: 400 bar
Gear hydraulic motors MB34
Aber
Product code: 5052
maximum torque: 461 N∙m
maximum speed: 2400 rpm
maximum displacement: 150 cm3/rev
maximum working pressure: 280 bar
Hydraulic motors
Hydraulic motors are designed to give the output link rotational motion at an unlimited angle. Which means that working fluid under pressure is supplied to the motor inlet, as a result at the output from the shaft, the torque is removed.
Unlike electric motors, a hydraulic motor of the same power has smaller dimensions, there are more opportunities to adjust the rotation speed, and the start-up and acceleration times are only a few seconds. Such motors are not afraid of frequent on and off, as well as reverse.
Classifications of hydraulic motors:
Today, the most popular hydraulic motors are:
- axial piston (adjustable and unregulated): working body — pistons from which chambers are formed. The pistons themselves are located on a special inclined disk, the presence of which allows you to change some parameters of the motor itself (for example, rotation speed);
- radial piston (multi-speed, adjustable, unregulated): as in the previous type of motors, the executive body is pistons. Each of them is located in a separate chamber, and the working fluid is supplied to each separately. The pistons themselves are connected to the motor shaft, to which the torque is transmitted;
- gear: is both a motor and a pump. The working chambers in this device form special gears. The device requires constant monitoring of the level of the working fluid and its temperature;
- gerotor: occupy an intermediate place between axial-piston and radial-piston. They provide consistently high torque, can be used in open and closed systems. An executive body is a pumping unit, a gerotor pair. In appearance, it resembles a gear, the internal teeth of which are connected to the body of the hydraulic motor. The external gear is connected to the output shaft.
Motorimpex company offers to buy any hydraulic motor of listed. We guarantee high quality, safety and best prices.