Hydraulic motors axial-piston
Brevini
Product code: 2296
maximum torque: 306 N∙m
maximum speed: 6000 rpm
maximum power: 125 kW
maximum displacement: 55 cm3/rev
maximum working pressure: 350 bar
Brevini
Product code: 2297
maximum torque: 600 N∙m
maximum speed: 4500 rpm
maximum power: 188 kW
maximum displacement: 107,5 cm3/rev
maximum working pressure: 350 bar
Brevini
Product code: 2298
maximum torque: 1219 N∙m
maximum speed: 6300 rpm
maximum power: 459 kW
maximum displacement: 178 cm3/rev
maximum working pressure: 430 bar
Brevini
Product code: 2300
maximum torque: 1254 N∙m
maximum speed: 3900 rpm
maximum power: 328 kW
maximum displacement: 225 cm3/rev
maximum working pressure: 350 bar
Brevini
Product code: 2301
maximum torque: 300 N∙m
maximum speed: 4000 rpm
maximum power: 128 kW
maximum displacement: 64 cm3/rev
maximum working pressure: 300 bar
Brevini
Product code: 2302
maximum torque: 1101 N∙m
maximum speed: 4450 rpm
maximum power: 330 kW
maximum displacement: 160 cm3/rev
maximum working pressure: 430 bar
Brevini
Product code: 2303
maximum torque: 1101 N∙m
maximum speed: 4450 rpm
maximum power: 330 kW
maximum displacement: 160 cm3/rev
maximum working pressure: 430 bar
Brevini
Product code: 2304
maximum torque: 1138 N∙m
maximum speed: 4450 rpm
maximum power: 369 kW
maximum displacement: 165 cm3/rev
maximum working pressure: 430 bar
Brevini
Product code: 2299
maximum torque: 1291 N∙m
maximum speed: 6300 rpm
maximum power: 459 kW
maximum displacement: 178 cm3/rev
maximum working pressure: 430 bar
Brevini
Product code: 5355
maximum working pressure: 500 bar
maximum flow rate: 350 l/min
for hydraulic motors of series: H1C, H1CR, SH11C, SH11CR, H2V, SH7V and SH7VR
Hydraulic motors
Hydraulic motors are designed to give the output link rotational motion at an unlimited angle. Which means that working fluid under pressure is supplied to the motor inlet, as a result at the output from the shaft, the torque is removed.
Unlike electric motors, a hydraulic motor of the same power has smaller dimensions, there are more opportunities to adjust the rotation speed, and the start-up and acceleration times are only a few seconds. Such motors are not afraid of frequent on and off, as well as reverse.
Classifications of hydraulic motors:
Today, the most popular hydraulic motors are:
- axial piston (adjustable and unregulated): working body — pistons from which chambers are formed. The pistons themselves are located on a special inclined disk, the presence of which allows you to change some parameters of the motor itself (for example, rotation speed);
- radial piston (multi-speed, adjustable, unregulated): as in the previous type of motors, the executive body is pistons. Each of them is located in a separate chamber, and the working fluid is supplied to each separately. The pistons themselves are connected to the motor shaft, to which the torque is transmitted;
- gear: is both a motor and a pump. The working chambers in this device form special gears. The device requires constant monitoring of the level of the working fluid and its temperature;
- gerotor: occupy an intermediate place between axial-piston and radial-piston. They provide consistently high torque, can be used in open and closed systems. An executive body is a pumping unit, a gerotor pair. In appearance, it resembles a gear, the internal teeth of which are connected to the body of the hydraulic motor. The external gear is connected to the output shaft.
Motorimpex company offers to buy any hydraulic motor of listed. We guarantee high quality, safety and best prices.