Hydraulic motors gerotor
Gerotor hydraulic motors BG and BH
Brevini
Product code: 2306
maximum torque: 360 N∙m
maximum speed: 1220 rpm
maximum power: 10.5 kW
maximum displacement: 382.5 cm3/rev
maximum working pressure: 165 bar
Gerotor hydraulic motors BR and BS
Brevini
Product code: 2308
maximum torque: 362 N∙m
maximum speed: 775 rpm
maximum power: 13 kW
maximum displacement: 393 cm3/rev
maximum working pressure: 175 bar
Gerotor hydraulic motors BGM
Brevini
Product code: 2307
maximum torque: 50 N∙m
maximum speed: 1550 rpm
maximum power: 2.3 kW
maximum displacement: 50 cm3/rev
maximum working pressure: 140 bar
Gerotor hydraulic motors BRZ
Brevini
Product code: 2309
maximum torque: 300 N∙m
maximum speed: 775 rpm
maximum power: 13 kW
maximum displacement: 393 cm3/rev
maximum working pressure: 175 bar
Gerotor hydraulic motors HR
Brevini
Product code: 2310
maximum torque: 885 N∙m
maximum speed: 932 rpm
maximum power: 23 kW
maximum displacement: 393 cm3/rev
maximum working pressure: 210 bar
Gerotor hydraulic motors HT
Brevini
Product code: 2311
maximum torque: 1220 N∙m
maximum speed: 625 rpm
maximum power: 33.5 kW
maximum displacement: 523 cm3/rev
maximum working pressure: 210 bar
Motor-wheel gerotor CTM and MB with reducer
Brevini
Product code: 2312
maximum torque: 1150 N∙m
maximum speed: 129 rpm
maximum displacement: 393 cm3/rev
maximum working pressure: 175 bar
Valves for gerotor hydraulic motors Brevini
Brevini
Product code: 5354
maximum working pressure: 500 bar
maximum flow rate: 350 l/min
for hydraulic motors of series: BGM, BG, BR, AR, HR and HT
Gerotor hydraulic motors AR
Brevini
Product code: 2305
maximum torque: 380 N∙m
maximum speed: 775 rpm
maximum power: 12.6 kW
maximum displacement: 393 cm3/rev
maximum working pressure: 175 bar
Hydraulic motors
Hydraulic motors are designed to give the output link rotational motion at an unlimited angle. Which means that working fluid under pressure is supplied to the motor inlet, as a result at the output from the shaft, the torque is removed.
Unlike electric motors, a hydraulic motor of the same power has smaller dimensions, there are more opportunities to adjust the rotation speed, and the start-up and acceleration times are only a few seconds. Such motors are not afraid of frequent on and off, as well as reverse.
Classifications of hydraulic motors:
Today, the most popular hydraulic motors are:
- axial piston (adjustable and unregulated): working body — pistons from which chambers are formed. The pistons themselves are located on a special inclined disk, the presence of which allows you to change some parameters of the motor itself (for example, rotation speed);
- radial piston (multi-speed, adjustable, unregulated): as in the previous type of motors, the executive body is pistons. Each of them is located in a separate chamber, and the working fluid is supplied to each separately. The pistons themselves are connected to the motor shaft, to which the torque is transmitted;
- gear: is both a motor and a pump. The working chambers in this device form special gears. The device requires constant monitoring of the level of the working fluid and its temperature;
- gerotor: occupy an intermediate place between axial-piston and radial-piston. They provide consistently high torque, can be used in open and closed systems. An executive body is a pumping unit, a gerotor pair. In appearance, it resembles a gear, the internal teeth of which are connected to the body of the hydraulic motor. The external gear is connected to the output shaft.
Motorimpex company offers to buy any hydraulic motor of listed. We guarantee high quality, safety and best prices.