Hydraulic motors
Galtech
Product code: 5130
maximum torque: 190 N∙m
maximum speed: 4000 rpm
maximum displacement: 77.2 cm3/rev
maximum working pressure: 280 bar
Intermot
Product code: 5090
with speed sensor
maximum torque: 1.61 N∙m/bar
maximum speed: 2400 rpm
maximum power: 60 kW
maximum displacement: 102 cm3/rev
maximum working pressure: 250 bar
Intermot
Product code: 5093
two-speed
with speed sensor
maximum torque: 1.61 N∙m/bar
maximum speed: 2350 rpm
maximum power: 60 kW
maximum displacement: 102 cm3/rev
maximum working pressure: 250 bar
Intermot
Product code: 5089
with speed sensor
maximum torque: 123 N∙m/bar
maximum speed: 950 rpm
maximum power: 180 kW
maximum displacement: 8062 cm3/rev
maximum working pressure: 250 bar
Intermot
Product code: 5087
with speed sensor
maximum torque: 85 N∙m/bar
maximum speed: 950 rpm
maximum power: 216 kW
maximum displacement: 5387 cm3/rev
maximum working pressure: 300 bar
Intermot
Product code: 5088
with speed sensor
maximum torque: 128 N∙m/bar
maximum speed: 750 rpm
maximum power: 258 kW
maximum displacement: 8062 cm3/rev
maximum working pressure: 270 bar
Intermot
Product code: 5086
maximum torque: 17697 N∙m
maximum speed: 1500 rpm
maximum displacement: 7122 cm3/rev
maximum working pressure: 250 bar
Hydraulic motors
Hydraulic motors are designed to give the output link rotational motion at an unlimited angle. Which means that working fluid under pressure is supplied to the motor inlet, as a result at the output from the shaft, the torque is removed.
Unlike electric motors, a hydraulic motor of the same power has smaller dimensions, there are more opportunities to adjust the rotation speed, and the start-up and acceleration times are only a few seconds. Such motors are not afraid of frequent on and off, as well as reverse.
Classifications of hydraulic motors:
Today, the most popular hydraulic motors are:
- axial piston (adjustable and unregulated): working body — pistons from which chambers are formed. The pistons themselves are located on a special inclined disk, the presence of which allows you to change some parameters of the motor itself (for example, rotation speed);
- radial piston (multi-speed, adjustable, unregulated): as in the previous type of motors, the executive body is pistons. Each of them is located in a separate chamber, and the working fluid is supplied to each separately. The pistons themselves are connected to the motor shaft, to which the torque is transmitted;
- gear: is both a motor and a pump. The working chambers in this device form special gears. The device requires constant monitoring of the level of the working fluid and its temperature;
- gerotor: occupy an intermediate place between axial-piston and radial-piston. They provide consistently high torque, can be used in open and closed systems. An executive body is a pumping unit, a gerotor pair. In appearance, it resembles a gear, the internal teeth of which are connected to the body of the hydraulic motor. The external gear is connected to the output shaft.
Motorimpex company offers to buy any hydraulic motor of listed. We guarantee high quality, safety and best prices.