Hydraulic motors

Gear hydraulic motors of 1600 series Gear hydraulic motors of 1600 series

Warynski Hydraulika

Product code: 975

maximum torque: 84 N∙m

maximum speed: 3000 rpm

maximum displacement: 41 cm3/rev

maximum working pressure: 170 bar

Gear hydraulic motors of 1900 series Gear hydraulic motors of 1900 series

Warynski Hydraulika

Product code: 976

maximum torque: 184 N∙m

maximum speed: 3000 rpm

maximum displacement: 62 cm3/rev

maximum working pressure: 210 bar

Gear hydraulic motors of 2100 series Gear hydraulic motors of 2100 series

Warynski Hydraulika

Product code: 977

maximum torque: 218 N∙m

maximum speed: 3000 rpm

maximum displacement: 110 cm3/rev

maximum working pressure: 170 bar

Gear hydraulic motors of 2200 series Gear hydraulic motors of 2200 series

Warynski Hydraulika

Product code: 978

maximum torque: 272 N∙m

maximum speed: 3000 rpm

maximum displacement: 110cm3/rev

maximum working pressure: 210 bar

Gear hydraulic motors of 3100 series Gear hydraulic motors of 3100 series

Warynski Hydraulika

Product code: 979

maximum torque: 389 N∙m

maximum speed: 3000 rpm

maximum displacement: 175 cm3/rev

maximum working pressure: 155 bar

Radial piston motors G Radial piston motors G

Intermot

Product code: 5090

with speed sensor

maximum torque: 1.61 N∙m/bar

maximum speed: 2400 rpm

maximum power: 60 kW

maximum displacement: 102 cm3/rev

maximum working pressure: 250 bar  

Radial piston multispeed motors GD Radial piston multispeed motors GD

Intermot

Product code: 5093

two-speed

with speed sensor

maximum torque: 1.61 N∙m/bar

maximum speed: 2350 rpm

maximum power: 60 kW

maximum displacement: 102 cm3/rev

maximum working pressure: 250 bar  

Radial piston motors IAM Radial piston motors IAM

Intermot

Product code: 5089

with speed sensor

maximum torque: 123 N∙m/bar

maximum speed: 950 rpm

maximum power: 180 kW

maximum displacement: 8062 cm3/rev

maximum working pressure: 250 bar  

Radial piston motors IAM+ Radial piston motors IAM+

Intermot

Product code: 5087

with speed sensor

maximum torque: 85 N∙m/bar

maximum speed: 950 rpm

maximum power: 216 kW

maximum displacement: 5387 cm3/rev

maximum working pressure: 300 bar  

Radial piston motors IAM • HD Radial piston motors IAM • HD

Intermot

Product code: 5088

with speed sensor

maximum torque: 128 N∙m/bar

maximum speed: 750 rpm

maximum power: 258 kW

maximum displacement: 8062 cm3/rev

maximum working pressure: 270 bar  

Radial piston motors motors IHM Radial piston motors motors IHM

Intermot

Product code: 5086

maximum torque: 17697 N∙m

maximum speed: 1500 rpm

maximum displacement: 7122 cm3/rev

maximum working pressure: 250 bar  

Hydraulic motors

Hydraulic motors are designed to give the output link rotational motion at an unlimited angle. Which means that working fluid under pressure is supplied to the motor inlet, as a result at the output from the shaft, the torque is removed.

Unlike electric motors, a hydraulic motor of the same power has smaller dimensions, there are more opportunities to adjust the rotation speed, and the start-up and acceleration times are only a few seconds. Such motors are not afraid of frequent on and off, as well as reverse.

Classifications of hydraulic motors:

Today, the most popular hydraulic motors are:

  • axial piston (adjustable and unregulated): working body pistons from which chambers are formed. The pistons themselves are located on a special inclined disk, the presence of which allows you to change some parameters of the motor itself (for example, rotation speed);
  • radial piston (multi-speed, adjustable, unregulated): as in the previous type of motors, the executive body is pistons. Each of them is located in a separate chamber, and the working fluid is supplied to each separately. The pistons themselves are connected to the motor shaft, to which the torque is transmitted;
  • gear: is both a motor and a pump. The working chambers in this device form special gears. The device requires constant monitoring of the level of the working fluid and its temperature;
  • gerotor: occupy an intermediate place between axial-piston and radial-piston. They provide consistently high torque, can be used in open and closed systems. An executive body is a pumping unit, a gerotor pair. In appearance, it resembles a gear, the internal teeth of which are connected to the body of the hydraulic motor. The external gear is connected to the output shaft.

Motorimpex company offers to buy any hydraulic motor of listed. We guarantee high quality, safety and best prices.