Control-measuring devices temperature switch purity grade sensors
Oil particle monitor of working fluid cleanliness class LDP100
IFM
Product code: 5136
sensitivity: 4, 6, 14, 21 µm
measurement error: ± 1%
maximum working pressure: 420 bar
Oil level and temperature switch FS
Bieri
Product code: 2277
M20x1.5
sonde length: up to 1200 mm
temperature measuring range: 0–90 ºC
In-line contamination monitor ICM - 2.0
MPFiltri
Product code: 5477
sensitivity: 4, 6, 14, 21, 25, 38, 50, 70 µm
monitoring time: 10–3600 s
measurement accuracy: ± 0,5% (4, 6, 14 µm), ± 1% (21, 25, 38, 50, 70 µm)
maximum working pressure: 420 bar
In-line contamination Monitor ICM
MPFiltri
Product code: 5138
sensitivity: 4, 6, 14, 21, 25, 38, 50, 70 µm
monitoring time: 10–3600 s
measurement error: ± 0,5% (4, 6, 14 µm), ± 1% (21, 25, 38, 50, 70 µm)
maximum working pressure: 400 bar
Temperature Switches ETS320 (display)
Hydac
Product code: 3208
G1/2
measuring range: -25–100 °C
sonde length: 18 mm
maximum working pressure: 600 bar
Temperature Switches ETS380 (display)
Hydac
Product code: 3209
internal thread: M12x1
measuring range: -30–150 °C
Temperature Switches ETS3200 (display)
Hydac
Product code: 3211
G1/2
measuring range: -40–100 °C
sonde length: 18 mm
maximum working pressure: 600 bar
Electronic Temperature Switch ETS 3200 for Tank Installation with IO-Link Interface
Hydac
Product code: 3212
G1/2
measuring range: -40–100 °C
sonde length: 100, 250, 350 mm
maximum working pressure: 50 bar
Temperature Switches ETS3800 (display)
Hydac
Product code: 3213
internal thread: M12x1
measuring range: -30–150 °C
Contamination Sensor CS 1000
Hydac
Product code: 5141
sensitivity: 4, 6, 14, 21 µm
measurement accuracy: ± 0.5%
maximum working pressure: 350 bar
Contamination Sensor CS2000
Hydac
Product code: 5140
sensitivity: 2, 4, 5, 6, 14, 15, 21, 25, 50 µm
measurement accuracy: ± 0.5%
maximum working pressure: 350 bar
Oil Condition Sensor HLB 1300
Hydac
Product code: 5139
G3/4
maximum working pressure: 50 bar
measurement accuracy: ± 3%
Temperature switches TF, TM and TS4
Fox
Product code: 4259
G1/2, G3/8, M22x1.5
measuring range: -20–120 °C
maximum working pressure: 200 bar
Temperature Switches TMD4
Fox
Product code: 4258
G1/2, M22x1.5
measuring range: -20–120 °C
maximum working pressure: 200 bar
Temperature Switches TMR4
Fox
Product code: 4257
G1/2 , G3/8 , M22x1,5
measuring range: -20–120 °C
maximum working pressure: 200 bar
Temperature Switches TMS4 and TMS5
Fox
Product code: 4256
G1/2, G3/8, M22x1.5
measuring range: -20–90 °C
maximum working pressure: 200 bar
Temperature Switches TMS6
Fox
Product code: 4255
G1/2 , G3/8 , M22x1.5
measuring range: -20–90 °C
maximum working pressure: 200 bar
Temperature Switches XT5
Fox
Product code: 4254
G1/2
measuring range: -20–100 °C
sonde length: 150, 200, 250, 300 mm
maximum working pressure: 100 bar
Temperature Switches XT5V (display)
Fox
Product code: 4253
G1
measuring range: 0–100 °C
sonde length: 50–2000 mm
maximum working pressure: 100 bar
Programmable flow switch and SI0556 temperature (display)
IFM
Product code: 3829
internal thread: M18x1.5
sonde length: 45 mm
measuring range: 3–300 cm/s
temperature measuring range: 2–80 °C
maximum working pressure: 300 bar
Programmable flow and temperature switch SI5007 (display)
IFM
Product code: 3823
internal thread: M18x1.5
sonde length: 45 mm
measuring range: 3–300 cm/s
temperature measuring range: 2–80 °C
maximum working pressure: 300 bar
Combined programmable temperature sensors TN2105 (display)
IFM
Product code: 3982
G1/4
measuring range: -50–150 °C
sonde length: 25 mm
maximum working pressure: 400 bar
relay output
Combined programmable temperature sensors TN2115 (display)
IFM
Product code: 3981
G1/4
measuring range: -50–150 °C
sonde length: 50 mm
maximum working pressure: 400 bar
relay output
Control-measuring devices systems
Functional purpose of control-measuring device for hydraulic system
Control-measuring devices are special units which help you to get information about on the state of technological processes in the hydraulic system by measuring their parameters. These devices also serve for controlling different technical processes, increase productivity and guarantee safety work of hydraulic system.
Processing and measuring hydraulic parameters is a must in order to minimize the risk of equipment failures.
In the range of control-measuring devices for hydraulic systems our company offers:
- hydraulic pressure sensors;
- flow sensors;
- temperature sensors;
- oil level sensors;
- cleanliness class sensors;
- moisture content sensors;
- flow speed sensors;
- hydraulic pressure relay;
- temperature relay;
- oil level relay;
- viscometers;
- inductive sensors;
- limit switches;
- portable measuring instruments;
- digital displays.