Ball valves
Ball valves DSV (security units)
Hydac
Product code: 2680
3-way
M33x2, M20x1.5
DN 10
maximum working pressure: 350 bar
Ball valves KH3/KH4
Hydac
Product code: 2681
3- or 4-way
G1/8–G3/4, M12x1.5–M36x2
maximum working pressure: 500 bar
Ball valves KH3P/KH4P
Hydac
Product code: 2682
3- or 4-way
DN 6–20
maximum working pressure: 400 bar
Ball valves KHB/KHM
Hydac
Product code: 2683
2-way
G1/8–G2, M12x1.5–M52x2
maximum working pressure: 500 bar
Ball valves KHB3K
Hydac
Product code: 2686
3-way
G1/8–G2, M12x1.5–M52x2
maximum working pressure: 500 bar
Ball valves KHBF/KHMF/KHMFF
Hydac
Product code: 2687
2-way
DN 16–50
maximum working pressure: 315 bar
Ball valves KHB-F3/6 and KHM-F3/6
Hydac
Product code: 2688
2-way
DN 16–50
flanges SAE 1/2"–2"
maximum working pressure: 420 bar
Ball valves KHBF/KHMF
Hydac
Product code: 2689
2-way
DN 16–50
flanges SAE 1/2"–2"
maximum working pressure: 337 bar
Ball valves KHBG-F3/6 and KHMG-F3/6
Hydac
Product code: 2690
2-way
DN 16–50
flanges SAE 1/2"–2"
maximum working pressure: 420 bar
Ball valves KHBGS-F3/6 and KHMGS-F3/6
Hydac
Product code: 2691
2-way
DN 16–50
flanges SAE 1/2"–2"
maximum working pressure: 420 bar
Ball valves KHBH/KHMH
Hydac
Product code: 2692
2-way
DN 4–25
M16x1.5–M42x2
maximum working pressure: 800 bar
Ball valves KHF3
Hydac
Product code: 2695
2-way
DN 16–80
flanges SAE 1/2"–3"
maximum working pressure: 420 bar
Ball valves KHF3/6
Hydac
Product code: 2696
2-way
DN 16–80
flanges SAE 1/2"–3"
maximum working pressure: 420 bar
Crane for hydraulics
Hydraulic ball valves – a type of shut-off valve, due to which, under high pressure, the flow of the working fluid opens or closes in the hydraulic line. In this design, the ball acts as a shutter. On its axis, there is a through hole of a round shape, which serves for the passage of hydraulic fluid.
Stainless or carbon steel – the main materials from which, as a rule, the body of such a crane is made. As standard, ball valve seals are marked NBR, but EPDM, FKM and MVQ are also available.
Crane for hydraulics: its types and advantages
Based on the diameter of the passage hole, there are such types of valves for hydraulic systems:
- Full bore. Their hole size matches the inner diameter of the pipeline that will be connected.
- Reduced. In this case, the size of the hole in the ball valve differs by one step from the diameter of the pipeline.
By the number of passes, cranes are divided into two types:
- Two-way. They make it possible to open / shut off the flow of the working fluid in the hydraulic line even at extremely high pressures.
- Three-way. Designed for alternate transfer of the liquid flow entering the passage into the other two passages.
Among the advantages of such equipment are:
- small size and weight;
- mounting, regardless of valve position;
- high level of tightness;
- strength and durability of operation;
- the ability to feed the flow both in the opposite and in the forward direction;
- low cost.
You can choose a crane for hydraulics at an affordable price and the most suitable for your needs in our catalog. We have the best manufacturers, high-quality models of ball valves for oil, gas and other media.
We deliver to any city in Ukraine. Do not put off a profitable purchase for later!