
Hydraulic equipment catalog Epoll
5/8 UNF, 1/4 BSP, М28х1.5
capacity: 0.2–55 l
maximum working pressure: 360 bar
capacity: 0.075–3.5 l
maximum working pressure: 350 bar
capacity: 0.05–2.5 l
maximum working pressure: 330 bar
capacity: 0.8–1.5 l
maximum working pressure: 350 bar
maximum working pressure: 600 bar
maximum working pressure: 400 bar
M16x1.5
maximum working pressure: 220 bar
capacity: 0.1–1000 l
maximum working pressure: 375 bar
capacity: 0.2–55 l
maximum working pressure: 360 bar
capacity: 0.2–55 l
maximum working pressure: 360 bar
capacity: 0.7–55 l
maximum working pressure: 60 bar
capacity: 0.7–55 l
maximum working pressure: 60 bar
capacity: 1.25–55 l
maximum working pressure: 270 bar
capacity: 100–5000 l
maximum working pressure: 16 bar
capacity: 52 or 75 l
maximum working pressure: 360 bar
capacity: 3–55 l
maximum working pressure: 360 bar
capacity: 1.25–55 l
maximum working pressure: 270 bar
capacity: 0.1–1000 l
maximum working pressure: 375 bar
M28x1.5, M35x1.5, M45x1.5, M60x2
maximum working pressure: 630 bar
G1 1/4, G2
maximum working pressure: 400 bar
G1/2
maximum working pressure: 400 bar
G3/4, G1 1/4, G2
maximum working pressure: 420 bar
G1/2–G4
maximum working pressure: 360 bar
maximum flow rate: 9 l/min
maximum working pressure: 350 bar
tank capacity: 70 l
maximum working pressure: 400 bar
maximum working pressure: 400 bar
G1/2
maximum working pressure: 400 bar
2-way
G3/4
maximum working pressure: 320 bar
3-way
G3/4
maximum working pressure: 320 bar
maximum capacity of single accumulator: 1000 l
maximum working pressure: 375 bar
G3/4
maximum pressure: 413 bar
M28x1.5, M35x1.5, M45x1.5, M60x2
maximum pressure: 630 bar
G1 1/4, G2
maximum pressure: 400 bar
G1/2
maximum pressure: 400 bar
pulling force: 6.8 t
flow rate: 60 l/min
working pressure: 155 bar
rope: 25 m x Ø 12 mm
pulling force: 4.5 t
motor displacement: 50 cm3/rev
flow rate: 5 - 45 l/min
rope: 25 m x Ø 10 mm
maximum working pressure: 290 bar
maximum displacement: 122.72 cm3/rev
maximum working pressure: 400 bar
maximum displacement of section: 75.1 cm3/rev
DN 6, 10
maximum working pressure: 315 bar
maximum flow rate: 180 l/min
capacity: 0.075–4 l
maximum working pressure: 350 bar
G3/8
maximum working pressure: 350 bar
DN 10
G1/4
maximum working pressure: 350 bar
maximum flow rate: 120 l/min
for ZF trucks
maximum continuous torque: 300 N∙m
G1/8, М5х0,8, G1/4, G3/8, G1/2
scheme: 5/2, 5/3
max. number of cycles per sec.: 5
response time: 0,05 sec