
- Hydraulic equipment catalog
- Components for the assembly of power packs

Components for the assembly of power packs
Trading company "Motorimpex" is a leader in the supply of components for assembling hydraulic power units in Ukraine. We have the largest hydraulic warehouses in the country, and a large part of the brands is represented exclusively by us.
A wide range of models is always in stock. All products listed in the technical catalogs are available for order.
length: 76, 127, 254 mm
G1/8
Electromagnetic
Length: 500, 1000 mm
Electromagnetic
G1 1/4
Electromagnetic
G1/8 – G1, M10x1 – M22x1.5
G1/8
Tapered bore: 1:8
for hydraulic pumps SAP012-108
for transmitting power from 0,037 kW to 11
Maximum capacity: 30 l
capacity: 55 l
capacity: 60 l
capacity: 70 l
capacity: 75 l
capacity: 100 l
capacity: 165 l
capacity: 165 l
capacity: 175 l
capacity: 175 l
capacity: 185 l
capacity: 300 l
capacity: 100, 120, 150, 180, 200 l
capacity: 55 l
capacity: 60 l
capacity: 70 l
capacity: 75 l
capacity: 100 l
capacity: 165 l
capacity: 175 l
capacity: 185 l
diameter: 350, 475 mm
aluminum
diameter: 275, 400 mm
aluminum
for AC/DC hydraulic motors
drain filter with plate on the tank under the directional control valves
capacity: 6 – 250 l
capacity: 2 – 30 l
for DOCK LEVELLER
under pumps of group 0 and 1
filtration rating: 3 or 10 µm
maximum flow rate: 550 l/min
Length : 76, 127, 254 mm
length: 76, 127, 254 mm
for gear pump
maximum diameter: 350 mm
maximum motor power: 22 kW
for transmitting power from 0,037 kW to 800
for transmitting power from 0.037 to 800 kW
filtration rating: 3 or 10 µm
maximum flow: 2150 l/min
Category description
Components for the assembly of power packs
Application of components for assambly of hydraulic units
Hydraulic components are made for comfortable and high-quality assembly of hydraulic systems to make your work effective and safe.
On our website you can find a wide range of components for assembly of hydraulic power units:
- fillers with air filter (breather);
- pump mounts (bell housing);
- brackets for electric motors;
- couplings;
- filters;
- flanges;
- oil indicators;
- damping rings (shock absorbers);
- supports for pumps and hydraulic motors;
- aluminum tanks;
- steel tanks;
- technological hatches for hydraulic tanks, and other hydraulic equipment.
pulling force: 6.8 t
flow rate: 60 l/min
working pressure: 155 bar
rope: 25 m x Ø 12 mm
pulling force: 4.5 t
motor displacement: 50 cm3/rev
flow rate: 5 - 45 l/min
rope: 25 m x Ø 10 mm
maximum working pressure: 290 bar
maximum displacement: 122.72 cm3/rev
maximum working pressure: 400 bar
maximum displacement of section: 75.1 cm3/rev
DN 6, 10
maximum working pressure: 315 bar
maximum flow rate: 180 l/min
capacity: 0.075–4 l
maximum working pressure: 350 bar
G3/8
maximum working pressure: 350 bar
DN 10
G1/4
maximum working pressure: 350 bar
maximum flow rate: 120 l/min
for ZF trucks
maximum continuous torque: 300 N∙m
G1/8, М5х0,8, G1/4, G3/8, G1/2
scheme: 5/2, 5/3
max. number of cycles per sec.: 5
response time: 0,05 sec