Proportional hydraulics valves
Atos
Product code: 1181
with built-in analog electronics
DN 6
maximum working pressure: 350 bar
maximum flow rate: 43 l/min
Atos
Product code: 1180
with built-in digital electronics
DN 6 or 10
maximum working pressure: 350 bar
maximum flow rate: 160 l/min
Atos
Product code: 1182
with built-in digital electronics
with position sensor
DN 6 or 10
maximum working pressure: 350 bar
maximum flow rate: 170 l/min
Atos
Product code: 1183
with position sensor
with integrated digital electronics
DN 6 or 10
maximum working pressure: 350 bar
maximum flow rate: 170 l/min
Atos
Product code: 1184
with built-in analog electronics
with position sensor
DN 6 or 10
maximum working pressure: 350 bar
maximum flow rate: 170 l/min
Atos
Product code: 6704
DN 10-32
maximum working pressure: 350 bar
maximum flow rate: 1500 l/min
Atos
Product code: 1179
DN 6 or 10
maximum working pressure: 350 bar
maximum flow rate: 160 l/min
Atos
Product code: 1186
with built-in digital electronics
with position sensor
DN 6 or 10
maximum working pressure: 350 bar
maximum flow rate: 160 l/min
Atos
Product code: 1190
with built-in digital electronics
with position sensor
DN 10–32
maximum working pressure: 350 bar
maximum flow rate: 1600 l/min
Atos
Product code: 1188
with 2 position sensors
with built-in digital electronics
DN 10–35
maximum working pressure: 350 bar
maximum flow rate: 3500 l/min
Atos
Product code: 1189
with built-in digital electronics
with 2 position sensors
DN 10–35
maximum working pressure: 350 bar
maximum flow rate: 3500 l/min
Atos
Product code: 1187
with built-in digital electronics
DN 10–32
maximum working pressure: 350 bar
maximum flow rate: 1600 l/min
Atos
Product code: 1178
with built-in digital electronics
with position/pressure sensor
DN 6–32
maximum working pressure: 350 bar
maximum flow rate: 770 l/min
Atos
Product code: 1177
with position sensor
DN 6–32
maximum working pressure: 350 bar
maximum flow rate: 1300 l/min
Atos
Product code: 1185
with position sensor
with built-in digital electronics
DN 6 or 10
maximum flow rate: 1200 l/min
Atos
Product code: 1191
DT-04-2P male
AMP Junior Power Timer
Proportional hydraulics
Application of proportional hydraulics
Hydraulic equipment with proportional electric control is used for remote control of the parameters of the hydraulic drive, and is also used as links in closed-loop automatic control systems.
The kit includes a built-in or separately located electronic unit that provides coordination with the operating system, stability of the control current in the magnet winding regardless of its heating and voltage fluctuations in the network, proportional dependence of the control current on the input signal, coordination with low-power control devices and standard buses ( CAN-bus, Profibus, etc.), the possibility of a linear increase in the control current for 0.1 ... 5 s with a step input signal (ramp), regulation of the oscillation amplitude and setting the initial current (zero setting), as well as direct connection of the master resistors.
In proportional equipment, command pulse modules are used. The model demodulator processes the signal, transmits the working signal.
The "Motorimpex" product range includes a wide range of proportional control hydraulic equipment:
- directional control valves;
- relief valves;
- pressure reducing valves;
- flow regulators;
- throttles.