Prepared a selection of useful videos for hydraulic engineers

From time to time, we must refresh our knowledge in hydraulics and pass it on to the next generations of engineers.

1.Let's do this using the example of the internal structure of the directional control valve WE6, which we are often asked about. We will uncover all the nuances of switching the directional control valve in both directions, as well as address questions regarding manual switching and valve replacement. You will be able to see a live demonstration and receive valuable advice from our specialists.

If you want to elevate your skills in hydraulics and pneumatics to a new level and witness the equipment in action, we are ready to welcome you to our training center!

2. Changing the direction of rotation on the unidirectional hydraulic gear pump from Kazel

The instruction is useful when the rotation direction of the hydraulic pump and the drive does not match. During brief rotation, this leads to instant seal damage (seal ring extrusion), and during prolonged rotation, it causes the internal parts of the pump to burn out (dry operation). To prevent this, before starting, we recommend checking the synchronization of the drive and pump rotation, and if necessary, changing the rotation direction of the gear hydraulic pump.

3. The LAB-PG2 series pressure gauge is a budget version with improved characteristics corresponding to the accuracy class of 0.25%.

The main application area is in industrial sectors where it is necessary to monitor operational processes with high precision. Additionally, the LAB-PG2 is used as a reference pressure gauge for checking other pressure measuring devices.

We offer you a video review demonstrating its operation, as well as technical documentation at the following link: https://motorimpex.ua/ua/products/manometri-radialni-lab-pg2-elektronni

4. We are often asked how to avoid problems with seals.

It's simple! You just need to convert the bidirectional gear hydraulic pump into a unidirectional one.