Hydraulic equipment catalog Hydac
connectivity cleanliness class sensors AS1000 and CS1000 moisture sensors in the hydraulic fluid
can be used as a modem with a measuring board CMU 1000
with built-in digital electronics
DN 10
maximum working pressure: 320 bar
maximum flow rate: 90 l/min
maximum working pressure: 4.5 bar
maximum flow rate: 18 l/min
maximum working pressure: 4.5 bar
maximum flow rate: 114 l/min
maximum working pressure: 8 bar
maximum flow rate: 9 l/min
maximum working pressure: 6 bar
maximum flow rate: 5 l/min
maximum working pressure: 6 bar
maximum flow rate: 20 l/min
tank capacity: 110, 135, 185 l
maximum working pressure: 10 bar
maximum flow rate: 900 l/min
maximum working pressure: 6 bar
maximum working pressure: 8 bar
maximum flow rate: 9 l/min
measuring range: -0–100 °C
G1/2
measuring range: -40–100 °C
sonde length: 18 mm
maximum working pressure: 600 bar
G1/2
measuring range: -40–100 °C
sonde length: 100, 250, 350 mm
maximum working pressure: 50 bar
internal thread: M12x1
measuring range: -30–150 °C
sonde length: 250, 410, 520, 730 mm
maximum working pressure: 3 bar
sonde length: 250, 410, 520, 730 mm
maximum working pressure: 0.5 bar
M30x1.5
sonde length: 280, 480, 1600, 4000, 6400 mm
G3/4
sonde length: 250, 280, 370, 410, 520, 730 mm
maximum working pressure: 600 bar
sensitivity: 4, 6, 14, 21 µm
measurement accuracy: ± 0.5%
maximum working pressure: 350 bar
sensitivity: 2, 4, 5, 6, 14, 15, 21, 25, 50 µm
measurement accuracy: ± 0.5%
maximum working pressure: 350 bar
G3/4
maximum working pressure: 50 bar
measurement accuracy: ± 3%
G3/8
maximum working pressure: 50 bar
measurement accuracy : ± 3%
measurement accuracy: ± 2%
temperature measuring range: -20–120 °C
maximum working pressure: 10 bar
G3/8
measurement accuracy: ± 3%
maximum working pressure: 50 bar
measurement accuracy: ± 2%
maximum working pressure: 10 bar
frequency: 0.1–20000 Hz
sonde length: up to 46 mm
maximum working pressure: 10 bar
pulling force: 6.8 t
flow rate: 60 l/min
working pressure: 155 bar
rope: 25 m x Ø 12 mm
pulling force: 4.5 t
motor displacement: 50 cm3/rev
flow rate: 5 - 45 l/min
rope: 25 m x Ø 10 mm
maximum working pressure: 290 bar
maximum displacement: 122.72 cm3/rev
maximum working pressure: 400 bar
maximum displacement of section: 75.1 cm3/rev
DN 6, 10
maximum working pressure: 315 bar
maximum flow rate: 180 l/min
capacity: 0.075–4 l
maximum working pressure: 350 bar
G3/8
maximum working pressure: 350 bar
DN 10
G1/4
maximum working pressure: 350 bar
maximum flow rate: 120 l/min
for ZF trucks
maximum continuous torque: 300 N∙m
G1/8, М5х0,8, G1/4, G3/8, G1/2
scheme: 5/2, 5/3
max. number of cycles per sec.: 5
response time: 0,05 sec