- Hydraulic equipment catalog
- Hydraulic pumps
Hydraulic pumps - Page 10
We are a leading supplier of hydraulic pumps in Ukraine. A large part of the product brands is available only from us.
Most product models are constantly in stock for quick supply. All nomenclature listed in the technical catalogs is available for order.
maximum working pressure: 500 bar
maximum displacement: 8.14 cm3/rev
maximum working pressure: 700 bar
maximum displacement: 8.14 cm3/rev
maximum displacement of high-pressure pump: 1.88 cm3/rev
maximum working pressure: 700 bar
maximum displacement of low-pressure pump: 4.6 cm3/rev
maximum working pressure: 160 bar
maximum working pressure: 700 bar
maximum displacement: 8.14 cm3/rev
maximum working pressure: 700 bar
maximum displacement: 0.34 cm3/rev
from 2 to 9 flows
maximum working pressure: 700 bar
maximum displacement: 0.9 cm3/rev (up to 9 flows)
maximum displacement of radial piston pump: 8.14 cm3/rev
maximum working pressure: 1000 bar
maximum displacement of gear pump: 61.1 cm3/rev
maximum working pressure: 250 bar
maximum displacement of radial piston pump: 2.71 cm3/rev
maximum working pressure: 700 bar
maximum displacement of gear pump: 16.71 cm3/rev
maximum working pressure: 100 bar
maximum displacement of radial piston pump: 2.71 cm3/rev
maximum working pressure: 700 bar
maximum displacement of gear pump: 16.71 cm3/rev
maximum working pressure: 100 bar
maximum working pressure: 700 bar
maximum displacement: 8.14 cm3/rev
Hydraulic pumps

Hydraulic pump is one of the main components of the power pack. Its movement and effort depends on what kind of working volume the pump has and what pressure it is able to create.
Before buying hydraulic pump you have to familiarize yourself with its main operating parameters:
- working volume is the volume of working fluid which the pump displaces in one cycle of operation. It should be understood that the real efficiency of any pump is slightly lower due to possible leaks of the working fluid.
- maximum pressure — maximum pressure value at which the pump retains its operational characteristics even during continuous operation.
Properly selected hydraulic pump for your purposes is the key to long and uninterrupted operation of the entire hydraulic system. We are ready to consult you in choosing a hydraulic pump that will be optimally suited for your goals and objectives. Hydraulic pumps made in Italy, Portugal, Germany and other European countries are available. All products are certified, we give a guarantee for each unit.
Classification of hydraulic pumps

You can use hydraulic pump in any hydraulic power unit, this is the reason why you can buy pump one of the following types:
- axial piston systems are used in systems where it is necessary to use a pressure above 250 Bar with a working volume of liquid of more than 150 l/min;
- screw are designed for the largest feed, while they allow you to pump the working fluid with a very high viscosity;
- vane-type hydraulic pumps are very quiet;
- radial piston hydraulic pumps can operate at very high pressure indicators, but have one drawback: they have a rather modest displacement;
- manual hydraulic pumps are designed for manual pumping of small volumes of working fluid;
- gear hydraulic pumps are the most common type of pumps. Able to operate at pressures up to 250 bar, pumping up to 150 liters of working fluid per minute.
"Motorimpex" company offers to buy hydraulic pump of any type of the listed at reasonable price.
tank capacity: 15 / 30 l
flow rate: 4.5 / 9 l/min
engine power: 1.5 / 2.2 kW
relief valve: 150 / 120 bar
tank capacity: 30 / 40 L
flow rate: 16,2 / 40+20 l/min
engine power: 16 / 22 hp
relief valve: 100 / 170 bar
pulling force: 6.8 t
flow rate: 60 l/min
working pressure: 155 bar
rope: 25 m x Ø 12 mm
pulling force: 4.5 t
motor displacement: 50 cm3/rev
flow rate: 5 - 45 l/min
rope: 25 m x Ø 10 mm
for testing and servicing hydraulic cylinders, with pressure control and idle speed control
maximum working pressure: 400 bar
maximum displacement of section: 75.1 cm3/rev
DN 6, 10
maximum working pressure: 315 bar
maximum flow rate: 180 l/min
capacity: 0.075–4 l
maximum working pressure: 350 bar
G3/8
maximum working pressure: 350 bar
G1/8, М5х0,8, G1/4, G3/8, G1/2
scheme: 5/2, 5/3
max. number of cycles per sec.: 5
response time: 0,05 sec