Hydraulic equipment catalog New products
for trucks with VOLVO gearbox
for ZF, Mercedes, Volvo, Eaton, Iveco trucks
maximum continuous torque: 500 N∙m
maximum continuous torque: 400 N∙m
for trucks with ZF gearbox
G3/4
maximum working pressure: 350 bar
maximum flow rate: 140 l/min
G1
maximum working pressure: 350 bar
maximum flow rate: 250 l/min
A6x21x25–A6x21x25
G1/8х2
maximum working pressure: 10 bar
G1/2, M14, M16
G1/8х3
maximum working pressure: 10 bar
G1/8х4
maximum working pressure: 10 bar
G1/8х4
maximum working pressure: 10 bar
12, 24 VDC
110, 220 VAC
Ø int 31,6 mm
Maximum capacity: 30 l
capacity: 55 l
capacity: 60 l
capacity: 70 l
capacity: 75 l
capacity: 100 l
capacity: 165 l
capacity: 165 l
capacity: 175 l
capacity: 175 l
capacity: 185 l
capacity: 300 l
capacity: 100, 120, 150, 180, 200 l
capacity: 55 l
capacity: 60 l
capacity: 70 l
capacity: 75 l
capacity: 100 l
capacity: 165 l
capacity: 175 l
capacity: 185 l
5/8 UNF, 1/4 BSP, М28х1.5
M12x1
frequency: 0–15000 Hz
sonde length: up to 10 m
length: 2 m
3/8 BSPP
maximum flow rate: 15 l/min
for SCM hydraulic motors (Sunfab)
maximum flow rate: 110 l/min
maximum operating temperature: 120°C
DC 12/24 V
compatible fluids: hydraulic oils, water-oil emulsions, aqueous glycol solutions
12, 24, 110 VDC
110, 220 VAC
pulling force: 6.8 t
flow rate: 60 l/min
working pressure: 155 bar
rope: 25 m x Ø 12 mm
pulling force: 4.5 t
motor displacement: 50 cm3/rev
flow rate: 5 - 45 l/min
rope: 25 m x Ø 10 mm
maximum working pressure: 290 bar
maximum displacement: 122.72 cm3/rev
maximum working pressure: 400 bar
maximum displacement of section: 75.1 cm3/rev
DN 6, 10
maximum working pressure: 315 bar
maximum flow rate: 180 l/min
capacity: 0.075–4 l
maximum working pressure: 350 bar
G3/8
maximum working pressure: 350 bar
DN 10
G1/4
maximum working pressure: 350 bar
maximum flow rate: 120 l/min
for ZF trucks
maximum continuous torque: 300 N∙m
G1/8, М5х0,8, G1/4, G3/8, G1/2
scheme: 5/2, 5/3
max. number of cycles per sec.: 5
response time: 0,05 sec