Hydraulic equipment catalog
for trucks with Mercedes gearbox
for trucks with ZF gearbox
with offset lubrication channel
for 272 mm cardan drive shafts
for trucks with ZF gearbox
for trucks with Mercedes gearbox
for trucks with VOLVO gearbox
for trucks with MB G 131-330 + RETARDER gearbox
for trucks with ZF gearbox
for trucks with ZF gearbox
for trucks with VOLVO gearbox
for ZF, Mercedes, Volvo, Eaton, Iveco trucks
maximum continuous torque: 500 N∙m
maximum continuous torque: 400 N∙m
for trucks with ZF gearbox
G3/4
maximum working pressure: 350 bar
maximum flow rate: 140 l/min
G1
maximum working pressure: 350 bar
maximum flow rate: 250 l/min
A6x21x25–A6x21x25
G1/8х2
maximum working pressure: 10 bar
G1/2, M14, M16
G1/8х3
maximum working pressure: 10 bar
G1/8х4
maximum working pressure: 10 bar
G1/8х4
maximum working pressure: 10 bar
12, 24 VDC
110, 220 VAC
Ø int 31,6 mm
Maximum capacity: 30 l
capacity: 55 l
capacity: 60 l
capacity: 70 l
capacity: 75 l
capacity: 100 l
capacity: 165 l
capacity: 165 l
capacity: 175 l
capacity: 175 l
capacity: 185 l
capacity: 300 l
capacity: 100, 120, 150, 180, 200 l
capacity: 55 l
capacity: 60 l
capacity: 70 l
capacity: 75 l
capacity: 100 l
capacity: 165 l
capacity: 175 l
capacity: 185 l
5/8 UNF, 1/4 BSP, М28х1.5
M12x1
frequency: 0–15000 Hz
sonde length: up to 10 m
pulling force: 6.8 t
flow rate: 60 l/min
working pressure: 155 bar
rope: 25 m x Ø 12 mm
pulling force: 4.5 t
motor displacement: 50 cm3/rev
flow rate: 5 - 45 l/min
rope: 25 m x Ø 10 mm
maximum working pressure: 290 bar
maximum displacement: 122.72 cm3/rev
maximum working pressure: 400 bar
maximum displacement of section: 75.1 cm3/rev
DN 6, 10
maximum working pressure: 315 bar
maximum flow rate: 180 l/min
capacity: 0.075–4 l
maximum working pressure: 350 bar
G3/8
maximum working pressure: 350 bar
DN 10
G1/4
maximum working pressure: 350 bar
maximum flow rate: 120 l/min
for ZF trucks
maximum continuous torque: 300 N∙m
G1/8, М5х0,8, G1/4, G3/8, G1/2
scheme: 5/2, 5/3
max. number of cycles per sec.: 5
response time: 0,05 sec