15.11.2025
AGRITECHNICA 2025
Detail
Hydraulic manifolds Atos
Hydraulic manifolds Atos
"Motorimpex" Production Enterprise designs and manufactures hydraulic manifolds, adapting them to specific customer requirements. The main purpose of using manifolds in hydraulic systems is to provide more efficient control of working fluid flows and at the same time simplify the design of hydraulic channels.
The manifold's base – the mounting plate – is milled on high-precision "Haas" machines. The components included in the hydraulic manifold are supplied by us from leading global hydraulic brands.
Filter
Product code: 02241048
Brand -
Atos
with hydraulic synchronization
maximum working pressure: 315 bar
maximum flow rate: 160 l/min
Product code: 02241049
Brand -
Atos
with manual synchronization
maximum working pressure: 315 bar
Product code: 501026998
Brand -
Kozmaksan
pulling force: 6.8 t
flow rate: 60 l/min
working pressure: 155 bar
rope: 25 m x Ø 12 mm
Product code: 501027001
Brand -
Kozmaksan
pulling force: 4.5 t
motor displacement: 50 cm3/rev
flow rate: 5 - 45 l/min
rope: 25 m x Ø 10 mm
Product code: 201017018
Brand -
OMFB
maximum working pressure: 290 bar
maximum displacement: 122.72 cm3/rev
Product code: 201017006
Brand -
OMFB
maximum working pressure: 400 bar
maximum displacement of section: 75.1 cm3/rev
Product code: 12146986
Brand -
Oleodinamica Mozioni
DN 6, 10
maximum working pressure: 315 bar
maximum flow rate: 180 l/min
Product code: 11806588
Brand -
HST
capacity: 0.075–4 l
maximum working pressure: 350 bar
Product code: 05356705
Brand -
OMT
G3/8
maximum working pressure: 350 bar
Product code: 27666796
Brand -
Motorimpex
DN 10
G1/4
maximum working pressure: 350 bar
maximum flow rate: 120 l/min
Product code: 521016991
Brand -
OMFB
for ZF trucks
maximum continuous torque: 300 N∙m
Product code: 55776474
Brand -
Airneo
G1/8, М5х0,8, G1/4, G3/8, G1/2
scheme: 5/2, 5/3
max. number of cycles per sec.: 5
response time: 0,05 sec
Write to us
