Hydraulic motors axial-piston
Axial piston motors MAP 22÷28
M+S Hydraulic
Product code: 2619
maximum torque: 159 N∙m
maximum speed: 4200 rpm
maximum power: 48 kW
maximum displacement: 28.47 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MAP 35÷62
M+S Hydraulic
Product code: 2620
maximum torque: 318 N∙m
maximum speed: 4000 rpm
maximum power: 80 kW
maximum displacement: 62.4 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MAP 63÷100
M+S Hydraulic
Product code: 2621
maximum torque: 550 N∙m
maximum speed: 3500 rpm
maximum power: 130 kW
maximum displacement: 98.75 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MAPW 35÷62
M+S Hydraulic
Product code: 6323
maximum torque: 318 N∙m
maximum speed: 4000 rpm
maximum power: 80 kW
maximum displacement: 62.40 cm3/rev
maximum working pressure: 350 bar
Axial piston motors MAM 20÷50
M+S Hydraulic
Product code: 6324
maximum torque: 195 N∙m
maximum speed: 3600 rpm
maximum power: 50 kW
maximum displacement: 49.20 cm3/rev
maximum working pressure: 300 bar
Hydraulic motors
Hydraulic motors are designed to give the output link rotational motion at an unlimited angle. Which means that working fluid under pressure is supplied to the motor inlet, as a result at the output from the shaft, the torque is removed.
Unlike electric motors, a hydraulic motor of the same power has smaller dimensions, there are more opportunities to adjust the rotation speed, and the start-up and acceleration times are only a few seconds. Such motors are not afraid of frequent on and off, as well as reverse.
Classifications of hydraulic motors:
Today, the most popular hydraulic motors are:
- axial piston (adjustable and unregulated): working body — pistons from which chambers are formed. The pistons themselves are located on a special inclined disk, the presence of which allows you to change some parameters of the motor itself (for example, rotation speed);
- radial piston (multi-speed, adjustable, unregulated): as in the previous type of motors, the executive body is pistons. Each of them is located in a separate chamber, and the working fluid is supplied to each separately. The pistons themselves are connected to the motor shaft, to which the torque is transmitted;
- gear: is both a motor and a pump. The working chambers in this device form special gears. The device requires constant monitoring of the level of the working fluid and its temperature;
- gerotor: occupy an intermediate place between axial-piston and radial-piston. They provide consistently high torque, can be used in open and closed systems. An executive body is a pumping unit, a gerotor pair. In appearance, it resembles a gear, the internal teeth of which are connected to the body of the hydraulic motor. The external gear is connected to the output shaft.
Motorimpex company offers to buy any hydraulic motor of listed. We guarantee high quality, safety and best prices.